Solid aluminum panels, gull-wing access, dual T-slot roof tracks — built for the job site and the long haul.
Built for the 2019-2025 RAM 1500, this aluminum truck cap delivers the strength and durability you need without the weight penalty of traditional steel toppers.
Once installed, your RAM looks factory-fitted — purpose-built for the job site, the campsite, or anywhere in between.
No glass. No compromise. Solid aluminum panels keep your tools and gear completely out of sight — maximum security on the job site or in the parking lot. Cleaner lines, lower profile, and no risk of broken glass.
Lighter than steel. Tougher than fiberglass. Won’t rust, won’t crack — built to outlast your truck.
No glass. No compromise. Solid aluminum panels keep your tools and gear completely out of sight — maximum security on the job site or in the parking lot. Cleaner lines, lower profile, and no risk of broken glass.
Full-length aluminum T-slot rails run the entire roof — strong, clean, and ready for crossbars, cargo carriers, or a rooftop tent. No drilling. Compatible with most universal T-slot systems.
Factory pre-drilled side walls let you mount shelving units, tool organizers, or gear trays directly to both interior walls — no modifications needed. Storage modules sold separately.
Easy Access. Large gull-wing side doors with gas struts allow full access to the front of your truck bed.
Lockable System. Each door has weather-sealed locks with a unified key system for security.
Clamp System. Secure mounting to your 6.4ft bed without drilling holes in your truck bed rails.
Reversible. Can be removed without leaving permanent modifications to your RAM.
Flat-Pack Shipping. 6-piece modular design allows efficient shipping and assembly with basic hand tools.
Assembly Time. 1-2 hours for assembly, 0.5-1 hour for installation to truck bed.
Replaceable Panels. Individual panels can be replaced if damaged.
Static Load (Parked). 850 lbs (385 kg) — Rooftop tent compatible when parked.
Dynamic Load (Moving). 450 lbs (205 kg) — Safe load capacity while driving.
Air Vent. Built-in filtered vent helps reduce dust accumulation and heat buildup inside the bed.
Weather Sealing. EPDM rubber seals around doors help keep the interior dry during rain and car washes.
| Application | RAM 1500 Tradesman, Big Horn, Laramie, Rebel, Limited, TRX (2019–2025) |
| Bed Fitment | 6.4 ft long bed |
| Primary Material | 6000-Series Aluminum |
| Finish | Matte Black Powder Coat |
| Side Doors | Solid Aluminum Panels (No Windows) |
| Rear Door | Tinted Tempered Glass |
| Roof Tracks | Dual Full-Length T-Slot Aluminum Tracks |
| Interior Rails | Pre-Drilled Side Mounting Points (Storage Modules Sold Separately) |
| Mounting System | No-Drill Clamp System |
| Weight | ~190 lbs (86 kg) |
Solid aluminum panels keep cargo completely hidden — better security on job sites and in public parking. No glass means no breakage risk.
The cap is designed as a solid-panel build. Window versions are available as a separate model.
Crossbars, cargo carriers, bike racks, rooftop tents — anything with a standard T-slot mount. No drilling required.
Yes. Pre-drilled mounting points on both interior side walls accept bolt-on shelving, tool organizers, and gear trays. Storage modules sold separately.
No. The clamp system secures to your bed rails — fully reversible, no permanent modifications.
1-2 hours to assemble, plus 30-60 minutes to install on your truck.
Yes. Use crossbars on the T-slot tracks — rated for rooftop tents when parked.
Yes. EPDM seals on all doors plus a built-in filtered vent keep water and dust out.
At ~190 lbs, it’s lighter than steel alternatives — more payload stays in the bed where it belongs.
For all orders exceeding a value of 200USD shipping is offered for free.
Returns will be accepted for up to 30 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.
Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.
Returns will be accepted for up to 30 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
– Received the wrong item.
– Item arrived not as expected (ie. damaged packaging).
– Item had defects.
– Over delivery time.
– The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.
Here’s some of our most similar products people are buying. Click to discover trending style.