Continental 48 states
Our California warehouse
Lightweight · weather-tight
Factory bed rails · no drilling
Fits: 2004–2014 (5.5ft)
Precision-engineered bolt-on fit — no modification required
6061-T6 Aluminum
850 lb
450 lb
Powder-Coated Black
Bolt-On · Bed Rail Clamps
About 1–2 hours
13/17mm sockets, Phillips screwdriver, torque wrench
Intermediate · 2 people required
No drilling — uses existing bed holes
Built for work and adventure — automotive-grade tempered glass, integrated side sliders, and gull-wing access in a lightweight aluminum build.
Built for the 2004-2014 Ford F-150, this aluminum truck cap delivers the strength and durability you need without the weight penalty of traditional steel toppers.
Once installed, your F-150 looks factory-fitted — purpose-built for the job site, the campsite, or anywhere in between.
Full-panel automotive-grade tempered glass on every side door — wide-view, impact-resistant, and tinted for privacy without sacrificing natural light. An integrated slider panel opens on demand for direct bed-side access or ventilation — no need to open the rear door.
Lighter than steel. Tougher than fiberglass. Aluminum does not rust and will not crack the way fiberglass can.
Full-panel automotive-grade tempered glass spans each side door — wide-view, impact-resistant, and tinted for privacy without sacrificing natural light.
An integrated slider panel opens on demand for direct bed-side access or ventilation — no need to open the rear door. Lockable for job site and trailhead security.
Flush-mount aluminum framing and UV-resistant seals complete the weathertight, low-profile build.
Full-length aluminum T-slot rails run the entire roof — strong, clean, and ready for crossbars, cargo carriers, or a rooftop tent. No drilling. Compatible with most universal T-slot systems.
Factory pre-drilled side walls let you mount shelving units, tool organizers, or gear trays directly to both interior walls — no modifications needed. Storage modules sold separately.
Easy Access. Large gull-wing side doors with tinted tempered glass windows and gas struts allow full access to the front of your truck bed.
Lockable System. Each door has weather-sealed locks with a unified key system for security.
Clamp System. Secure mounting to your 5.5ft bed without drilling holes in your truck bed rails.
Reversible. Can be removed without leaving permanent modifications to your F-150.
Flat-Pack Shipping. 6-piece modular design allows efficient shipping and assembly with basic hand tools.
Assembly Time. 1–2 hours for assembly, then 30–60 minutes to mount on the truck.
Replaceable Panels. Individual panels and windows can be replaced if damaged.
Static Load (Parked). 850 lbs (385 kg) — Rooftop tent compatible when parked.
Dynamic Load (Moving). 450 lbs (205 kg) — Safe load capacity while driving.
Weather Sealing. A multi-point sealing system with precision-fitted EPDM gaskets around all windows and doors creates a fully enclosed, weather-tight interior.
Corrosion-Resistant Build. High-strength aluminum alloy construction delivers far better corrosion resistance than painted steel.
| Application | Ford F-150 XL, XLT, Lariat, King Ranch, Platinum, FX4 (2004–2014) |
| Bed Fitment | 5.5ft Bed |
| Primary Material | 6000-Series Aluminum |
| Finish | Matte Black Powder Coat |
| Side Glass | Automotive-Grade Tempered, Tinted + Integrated Slider |
| Rear Door | Tinted Tempered Glass |
| Roof Tracks | Dual Full-Length T-Slot Aluminum Tracks |
| Interior Rails | Pre-Drilled Side Mounting Points (Storage Modules Sold Separately) |
| Mounting System | No-Drill Clamp System |
| Weight | ~190 lbs (86 kg) |
Yes — designed for ventilation at low speeds. Close and lock at highway speeds for weatherproofing.
No. Rubber-lined aluminum track keeps the slider tight at highway speed.
Yes. All panels use the same automotive-grade tempered glass — consistent strength, tint, and UV protection throughout.
Yes. Each slider has its own lockable latch, separate from the gull-wing door locks.
Crossbars, cargo carriers, bike racks, rooftop tents — anything with a standard T-slot mount. No drilling required.
Yes. Pre-drilled mounting points on both interior side walls accept bolt-on shelving, tool organizers, and gear trays. Storage modules sold separately.
No. The clamp system secures to your bed rails — fully reversible, no permanent modifications.
1–2 hours to assemble, then 30–60 minutes to mount on your truck.
Yes. Use crossbars on the T-slot tracks — rated for rooftop tents when parked.
Yes. A multi-point EPDM sealing system on all windows and doors, combined with an all-aluminum, corrosion-resistant structure, keeps water and dust out.
At ~190 lbs, it's lighter than steel alternatives — more payload stays in the bed where it belongs.
Same product, different regional names. "Truck cap" and "truck topper" are the usual terms in the Midwest and East, "camper shell" on the West Coast, and "canopy" in Canada and the Pacific Northwest. This is an aluminum truck cap for the 2004–2014 Ford F-150 5.5 ft bed: 6000-series aluminum shell, no fiberglass, no gelcoat to crack.
— WHO IS TKMAUTO
TKMAUTO focuses on one thing: lightweight aluminum accessories to bling out your truck, old or new, however you want it. Every product ships from our California warehouse, directly to your driveway anywhere in the continental US.
If you have any questions before buying - about fitment, quality, installation - email us, and we'll answer.
Email — info@tkmauto.com
California, USA
Every order ships from our CA warehouse via U.S. freight carriers.
Free U.S. Shipping
Continental 48 states. AK, HI, and U.S. territories on quote.
Aluminum Construction
Lightweight, weather-tight panels. DIY bolt-on install.
6 Truck Lines Supported
Ford · Toyota · GMC · Chevrolet · RAM · Jeep — year-specific fitment.
Cap, cross bar, rack platform — engineered as one system. Add all three for a complete overland build.
Most customers complete the install in about 1–2 hours with two people. No drilling is required — the cap secures to your existing bed rail holes with the included mounting clamps. An install guide is in the box.
We build both versions on the same 6061-T6 aluminum shell — same load rating, same bolt-on install. The difference is only the side panels:
Windows — tempered sliding glass on the driver and passenger sides. Better for overlanding, camping, pets, or any time you want airflow and outward visibility.
Solid — fully enclosed aluminum panels. Better for job-site tool security or gear you want out of sight and keyed-locked.
This cap is cut for the specific year, make, model, and bed length listed in the fitment box at the top of the page. If your truck matches that spec, the cap is engineered to bolt right on. Short-bed and long-bed versions are not interchangeable.
The shell is 6061-T6 aluminum — corrosion resistance is inherent to the material, so the structure won't rust. The exterior is finished in powder-coated black for UV protection. Even if the powder-coat gets scuffed at a job site, the aluminum underneath stays sound. If you ever have a structural concern, contact us at info@tkmauto.com and we'll work with you directly.
Free freight shipping in the continental US, from our California warehouse via LTL carrier. Delivery requires a signature; the carrier will schedule a window once it reaches your local terminal. A phone number is required at checkout so the freight carrier can reach you to schedule delivery.
Built with 6061-T6 aluminum shell and stainless steel hardware. If you ever have a structural concern with your cap, contact us at info@tkmauto.com and our California team will work with you directly.
$100 off your first Truck Bed Cap — Truck Bed Caps only, not valid on other products
Valid on Truck Bed Caps only — not applicable to roof racks, bed racks, bumpers, roll bars, or accessories. One-time use per customer. We'll email the code and occasional product updates — unsubscribe anytime.
✓ Code ready — apply at checkout. Also sent to your email.
Valid on Truck Bed Caps only — not applicable to other products.
